LAN smart Pro is a hand-held, multifunction Cable Map Tester and Cable Length Meter.
It has an integrated Anglo and Digital Tone Generator, Port Finder, and Quick Test.
It displays cable map results in a pin-to-pin format including split pairs.
By using TDR (Time Domain Reflect ) t echnology, it provides a great deal of accuracy when measuring
cable length and locating split pairs.
Suitable for professional technicians or installers.

Features

• All-in-one Tester : Wire map, twisted mapping,short location, quick test, cable length test,
  self-calibrating ability, analog and digital tone generator and port finder.
• Incorporates : - TDR ( Time Domain Reflect ) technology.
                        - Quick Test Function : Memorize a cable's pin out as standard, and test mass cables.
                        - Short Location Function : Locate short position, it determines if short is in the near
                          or far end of the cable
                        - Port Finder Function : Locate corresponding socket on hub / switch
• Wire map for open, short, reversed, cross, split, miswire, and shield continuity
• Wire map results are displayed in a pin-to-pin format.
• Indicates the remote number of the remote identification unit for wire map test.
• Measures : - Twisted pairs of Cat 5, Cat 5E & Cat 6 length without remote.
                    - Length of flat 2-pin, 4-pin, and 6-pin telephone line.
                    - Coax line length.
• Self-calibrating ability for non-standard cables length test to enhance measuring accuracy.
• Uses both meter & feat standards for cable length display.
• Its Anolog Tone Generator sends 1KHz tone on all pins or selected single pin conductors.
• Its Digital Tone Generator sends Single Tone and Double Tone.
• LCD & "beep" indicator.
• RJ45 / RJ11 / Coax port protection from telephone line damage
• Replaceable battery, with low battery indicator.

Specifications

• Display : 128 * 64 Dot Matrix LCD
• Connector Type : RJ45 / RJ11 / Coax (Main and Remote)
• Accuracy : ± 2m less than 10m (± 6.56 feet in less than 32.81 feet)
                  ± 5% over 10m (32.81 feet)
• Test Range for Cable Length : 1 ~ 300 m (3 ~ 984 feet)
• Split Pairs Detection : Minimum 1.2 m (3.94 feet )
• Tone Generator : 1 KHz
• Digital Tone Generator : Singale Tone and Double Tone
• Operating Temprature : 0°C ~ 50°C ( 32°F to 122°F )
  Storage Temprature : -30°C ~ -50°C ( -22°F ~ 122°F )
• Humidity : 10% ~ 90%
• Weight : Main Unit 120g. Remote Unit 20g
• Dimension : Main 120*80*33mm / Remote 44*32*28.5mm
• Power Source :DC 6V ; 4 * AAA battery